Polyethylene Fitting Corrugated Double Wall Fittings

Corrugated Double Wall Fittings

The importance of quality and variety of fittings are always be more important than pipes.
More than 85% of problems in transmission fluid are because of the lack of quality of fittings and incorrect application causes by incorrect fitting installation.

Equal and diverse fittings, are implemented the projects with the highest quality.

Lack of adequate resistance and sealing in fittings, causing leakage and environmental pollution, and Penetration of plant roots eventually blocked the pipeline network.

In areas with high groundwater level, water infiltration into the sewer network and increase the amount of fluid, thus making it mandatory to construct wastewater refineries with higher capacity.

Pars Ethylene Kish co according to its valuable experiences as a leader of manufacturers of polyethylene pipe and fittings, proud itself to be a model for other manufacturers.

Parsethylene various fittings types:

• Tee Reducer 45° (Double Wall to Double Wall)
• Tee Reducer 45° (Double Wall to Single Wall)
• Tee Elbow (Double Wall to Sigle Wall)
• Threaded Tee Elbow
• Coupler
• Cross (Double Wall to Single Wall)
• Cross (Double Wall to Double Wall)
• Double Wall Tee 90°
• Cap
• Reducer (Double Wall to Single Wall)
• Reducer (Singel Wall to Double Wall)
• Tee 90° (For Double Wall Pipes)
• Tee 45° (For Double Wall Pipes)
• Double Wall Siphon
• Double Wall Reducer Siphon
• Push fit siphon
• Connected Siphon
• Integrated Siphon

Easy installation, pressure and corrosion resistance, light weight and low cost material and installation and durability make these products popular for wastewater projects.